
Self-adhesive elastomer bitumen vapor barrier sheet with fiber reinforced glass fleece and polyester-aluminumlaminate reinvorcement in a thickness of 2.5 mm.
Elastomer bitumen is highly elastic ("rubbery") and thereby remains flexible even at low temperatures.
The aluminumlaminate reinvorcement has a very high vapor barrier value (sd-value approx 1.500 m).
The surface texture upside is has fine granule and the downside has a silicone peel-off film onesided perforated.
The bonding is done by removal of the special foil. In order to ensure save adhesion of the sheet, we recommend a minimum temperature of +10°C (air and surface) during the application.
The outer half of the longitudinal seam overlap has a double-sided foil lamination. This guarantees a safe scarfing of the overlap because the inner section is already adhered by the self-adhesive bitumen mass. Therefore, a flame entry into the ground is prevented.
Dörr-Tiralbit E-ALGV-3 sk/Safeguard is used as bitumen vapor barrier sheet for flat roof constructions for profiled sheeting and wooden celling.
Coating
Self-adhesive elastomer bitumenReinforcement
Polyster-aluminumlaminate /
Combi reinforcement glass fleece/mesh lathSurface texture upside
Fine granuleSurface texture downside
Silicone peel-off film onesided perforated,
Safety stichThickness
2.5 mmWidth/length of the sheet
1,08 x 10 m = 10,8 m²
Fields of Application

- Vapor barrier sheet
for profiled sheeting and
wooden celling